Explosion Proof 90° Stanchion Mount Luminaire
The Explosion Proof 90° Stanchion Mount Luminaire is a durable and reliable lighting solution for hazardous locations. It features a rugged aluminum housing, a tempered glass lens, and a 90° angle bracket
- Housing: Heavy-Duty Die Cast Aluminum Housing
- Mounts to 1¼” NPT Pipe
- Listing & Ratings: ETL Listed for Hazardous Locations Per UL844 as Follows: Class 1, Division 2 Groups A, B, C, D; T4 Temperature Rating, -25°C to +50°C Ambient. Suitable for Wet Locations, Sealed LED Compartment
- Lens: Clear Tempered Glass Lens
- Mountings 90° Stanchion
- LED: Aluminum Boards
- Warranty: 5-Year Warranty
The Jemm EPLP15F57U5KCGS90 Class 1, Division 2 90° Stanchion Mount Explosion Proof Hazardous Location Luminaire is available with a clear tempered glass lens. Typical lighting applications include industrial facilities, oil, gas, painting facilities, manufacturing, and auto service facilities.
- Housing: Heavy-Duty Die Cast Aluminum Housing
- Mounts to 1¼” NPT Pipe
- Listing & Ratings: ETL Listed for Hazardous Locations Per UL844 as Follows: Class 1, Division 2 Groups A, B, C, D; T4 Temperature Rating, -25°C to +50°C Ambient. Suitable for Wet Locations, Sealed LED Compartment
- Finish: Powdercoat Finish Over a Chromate Conversion Coating.
- Lens: Clear Tempered Glass Lens
- Mounting Options:
- Mountings 90° Stanchion
- EasyLED LED: Aluminum Boards
- Wattage: Array: 56.7w, System: 64w
- Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps.
- Warranty: 5-Year Warranty
| Kelvins | 4000K |
|---|---|
| Wattage | 57 Watt |
Related products
Explosion Proof Ceiling Mount Luminaire
The Explosion Proof Ceiling Mount Luminaire is a high-quality lighting fixture designed for hazardous locations. It features a robust aluminum housing, a tempered glass lens, and a sealed gasket to prevent sparks or flames from escaping.
Dimensions: 7-3/4″ x 10-1/2
Locations, Sealed LED Compartment
Finish: Powdercoat Finish Over a Chromate Conversion Coating.
Lens: Clear Tempered Glass Lens
LED Explosion Proof Horizontal Hood Linear Light
The LED Explosion Proof Horizontal Hood Linear Light is a durable and energy-efficient lighting solution for hazardous environments. This light features a robust aluminum housing with a tempered glass lens and a stainless steel mounting bracket.
- Finish: Platinum Powdercoat Finish Over a Chromate Conversion Coating.
- Lens: Clear Polycarbonate or SoftLED LumaLens Opal Polycarbonate Vandal-Resistant Lens
- Mounting Options: Mount with Stainless Steel Adjustable Bracket or Yoke. Rated for 6 #12 AWG 90°C for Through Wiring.
- EasyLED LED: Aluminum Boards
- Wattage: 22w: Array: 22w, System: 26.4w; (70w HID Equivalent)
- 37w: Array: 37.2w, System: 43.4w; (175w HID Equivalent)
- Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps.
- Warranty: 5-Year Warranty for -25°C to +40°
Explosion Proof Flood Light
The Jemm EPLP15F57U5KCGY Class 1, Division 2 Explosion Proof Hazardous Location Flood Light is available with a clear tempered glass lens. Typical lighting applications include industrial facilities, oil, gas, painting facilities, manufacturing, and auto service facilities.
- Housing: Heavy-Duty Die Cast Aluminum Housing
- Dimensions: 7-1/4″ x 10-1/2″
- Finish: Powdercoat Finish Over a Chromate Conversion Coating.
- Lens: Clear Tempered Glass Lens
- Yoke Mount
Explosion Proof 25° Wall Mount Mount Luminaire
The Explosion Proof 25° Wall Mount Luminaire is a durable and reliable lighting solution for hazardous locations. It features a rugged die-cast aluminum housing with a powder-coat finish and a tempered glass lens,
- Housing: Heavy-Duty Die Cast Aluminum Housing
- Listing & Ratings: ETL Listed for Hazardous Locations Per UL844 as Follows: Class 1, Division 2 Groups A, B, C, D; T4 Temperature Rating, -25°C to +50°C Ambient. Suitable for Wet Locations, Sealed LED Compartment
- Finish: Powdercoat Finish Over a Chromate Conversion Coating.
- Lens: Clear Tempered Glass Lens
- Warranty: 5-Year Warranty
LED Explosion Proof 48″ Linear Light
The Jemm EPV4A Class 1, Division 2 Explosion Proof Hazardous Location series wall and ceiling mount luminaire is available with clear or LumaLens lenses and open door frame designed to replace HID lighting systems up to 400w MH or HPS. Typical lighting applications include industrial facilities, oil, gas, painting facilities, and auto service facilities. Mounting heights of 18 to 30 feet can be used based on light level and uniformity requirements.
Housing: Heavy-Duty Die Cast Aluminum Housing and Top Frame, with ½˝ Tapped Coin Plug Openings for Wiring Entrance Conduits.
Listing & Ratings: ETL Listed for Hazardous Locations Per UL844 as Follows: Class 1, Division 2 Groups A, B, C, D; T4 Temperature Rating Suitable for Wet Locations, IP66 Sealed LED Compartment
Finish: Platinum Powdercoat Finish Over a Chromate Conversion Coating.
Lens: Clear Polycarbonate or SoftLED LumaLens Opal Polycarbonate Vandal-Resistant Lens
Mounting Options: Mount with Stainless Steel Adjustable Bracket or Yoke. Rated for 6 #12 AWG 90°C for Through Wiring.
LED: Aluminum Boards
Wattage: 66w: Array: 66w, System: 77.3w; (250w HID Equivalent)
Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps.
Explosion Proof 90° Wall Mount Luminaire
Equipped with state-of-the-art engineering, the Explosion Proof 90 Wall Mount Luminaire boasts a robust construction built to withstand even the most extreme conditions. Its durable housing is made from corrosion-resistant materials, ensuring longevity and reliability in harsh environments prone to chemicals and corrosive substances.
- Housing: Heavy-Duty Die Cast Aluminum Housing
- Finish: Powdercoat Finish Over a Chromate Conversion Coating.
- Lens: Clear Tempered Glass Lens
- Mounting Options: Mountings Include Pendant (Conduit by Others)
- Warranty: 5-Year Warranty
Explosion Proof 25° Stanchion Mount Luminaire
The Explosion Proof 25° Stanchion Mount Luminaire is a durable and reliable lighting solution for hazardous locations. This luminaire features a rugged die-cast aluminum housing with a powder-coated finish
- Housing: Heavy-Duty Die Cast Aluminum Housing
- Mounts to 1¼” NPT Pipe
- Listing & Ratings: ETL Listed for Hazardous Locations Per UL844 as Follows: Class 1, Division 2 Groups A, B, C, D; T4 Temperature Rating, -25°C to +50°C Ambient. Suitable for Wet Locations, Sealed LED Compartment
- Warranty: 5-Year Warranty
LED Explosion Proof Open Hood Linear Light
The LED Explosion Proof Open Hood Linear Light is a durable and energy-efficient lighting solution for hazardous environments. This light features a robust aluminum housing with an open hood design.
Finish: Platinum Powdercoat Finish Over a Chromate Conversion Coating.
Lens: Clear Polycarbonate or SoftLED LumaLens Opal Polycarbonate Vandal-Resistant Lens
Mounting Options: Mount with Stainless Steel Adjustable Bracket or Yoke. Rated for 6 #12 AWG 90°C for Through Wiring.
EasyLED LED: Aluminum Boards
LED Explosion Proof 24″ Linear Light
The Jemm EPL2AOF66 Class 1, Division 2 66 Watt Explosion Proof Hazardous Location series wall and ceiling mount luminaire is available with clear or LumaLens lenses, and open, vertical half or horizontal half door frames designed to replace HID lighting systems from 70w to 175w MH or HPS. Typical lighting applications include industrial facilities, oil, gas, painting facilities, and auto service facilities. Mounting heights of 8 to 18 feet can be used based on light level and uniformity requirements.
Listing & Ratings: ETL Listed for Hazardous Locations Per UL844 as Follows: Class 1, Division 2 Groups A, B, C, D; T4 Temperature Rating Suitable for Wet Locations, IP66 Sealed LED Compartment
Finish: Platinum Powdercoat Finish Over a Chromate Conversion Coating.
Lens: Clear Polycarbonate or SoftLED LumaLens Opal Polycarbonate Vandal-Resistant Lens
Mounting Options: Mount with Stainless Steel Adjustable Bracket or Yoke. Rated for 6 #12 AWG 90°C for Through Wiring.
LED: Aluminum Boards
LED Explosion Proof Vertical Cutoff Hood Linear Light
The LED Explosion Proof Vertical Cutoff Hood Linear Light is a high-performance lighting solution for hazardous locations. This light features a durable aluminum housing with a vertical cutoff hood that reduces glare and provides optimal light distribution.
- Finish: Platinum Powdercoat Finish Over a Chromate Conversion Coating.
- Lens: Clear Polycarbonate or SoftLED LumaLens Opal Polycarbonate Vandal-Resistant Lens
- Mounting Options: Mount with Stainless Steel Adjustable Bracket or Yoke. Rated for 6 #12 AWG 90°C for Through Wiring.
- EasyLED LED: Aluminum Boards
