Explosion Proof 25° Wall Mount Mount Luminaire

The Explosion Proof 25° Stanchion Mount Luminaire is a durable and reliable lighting solution for hazardous locations. This luminaire features a rugged die-cast aluminum housing with a powder-coated finish

• Housing: Heavy-Duty Die Cast Aluminum Housing
• Mounts to 1¼” NPT Pipe
• Listing & Ratings: ETL Listed for Hazardous Locations Per UL844 as Follows: Class 1, Division 2 Groups A, B, C, D; T4 Temperature Rating, -25°C to +50°C Ambient. Suitable for Wet Locations, Sealed LED Compartment
• Warranty: 5-Year Warranty

The Jemm EPV4A Class 1, Division 2 Explosion Proof Hazardous Location series wall and ceiling mount luminaire is available with clear or LumaLens lenses and open door frame designed to replace HID lighting systems up to 400w MH or HPS. Typical lighting applications include industrial facilities, oil, gas, painting facilities, and auto service facilities. Mounting heights of 18 to 30 feet can be used based on light level and uniformity requirements.

Housing: Heavy-Duty Die Cast Aluminum Housing and Top Frame, with ½˝ Tapped Coin Plug Openings for Wiring Entrance Conduits.
Listing & Ratings: ETL Listed for Hazardous Locations Per UL844 as Follows: Class 1, Division 2 Groups A, B, C, D; T4 Temperature Rating Suitable for Wet Locations, IP66 Sealed LED Compartment
Finish: Platinum Powdercoat Finish Over a Chromate Conversion Coating.
Lens: Clear Polycarbonate or SoftLED LumaLens Opal Polycarbonate Vandal-Resistant Lens
Mounting Options: Mount with Stainless Steel Adjustable Bracket or Yoke. Rated for 6 #12 AWG 90°C for Through Wiring.
LED: Aluminum Boards
Wattage: 66w: Array: 66w, System: 77.3w; (250w HID Equivalent)
Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps.

The Jemm EPL2AOF66 Class 1, Division 2 66 Watt Explosion Proof Hazardous Location series wall and ceiling mount luminaire is available with clear or LumaLens lenses, and open, vertical half or horizontal half door frames designed to replace HID lighting systems from 70w to 175w MH or HPS. Typical lighting applications include industrial facilities, oil, gas, painting facilities, and auto service facilities. Mounting heights of 8 to 18 feet can be used based on light level and uniformity requirements.

Listing & Ratings: ETL Listed for Hazardous Locations Per UL844 as Follows: Class 1, Division 2 Groups A, B, C, D; T4 Temperature Rating Suitable for Wet Locations, IP66 Sealed LED Compartment
Finish: Platinum Powdercoat Finish Over a Chromate Conversion Coating.
Lens: Clear Polycarbonate or SoftLED LumaLens Opal Polycarbonate Vandal-Resistant Lens
Mounting Options: Mount with Stainless Steel Adjustable Bracket or Yoke. Rated for 6 #12 AWG 90°C for Through Wiring.
LED: Aluminum Boards

Equipped with state-of-the-art engineering, the Explosion Proof 90 Wall Mount Luminaire boasts a robust construction built to withstand even the most extreme conditions. Its durable housing is made from corrosion-resistant materials, ensuring longevity and reliability in harsh environments prone to chemicals and corrosive substances.

• Housing: Heavy-Duty Die Cast Aluminum Housing
• Finish: Powdercoat Finish Over a Chromate Conversion Coating.
• Lens: Clear Tempered Glass Lens
• Mounting Options: Mountings Include Pendant (Conduit by Others)
• Warranty: 5-Year Warranty

The Explosion Proof Ceiling Mount Luminaire is a high-quality lighting fixture designed for hazardous locations. It features a robust aluminum housing, a tempered glass lens, and a sealed gasket to prevent sparks or flames from escaping.

Dimensions: 7-3/4″ x 10-1/2
Locations, Sealed LED Compartment
Finish: Powdercoat Finish Over a Chromate Conversion Coating.
Lens: Clear Tempered Glass Lens

The Jemm EPLP15F57U5KCGY Class 1, Division 2 Explosion Proof Hazardous Location Flood Light is available with a clear tempered glass lens. Typical lighting applications include industrial facilities, oil, gas, painting facilities, manufacturing, and auto service facilities.

• Housing: Heavy-Duty Die Cast Aluminum Housing
• Dimensions: 7-1/4″ x 10-1/2″
• Finish: Powdercoat Finish Over a Chromate Conversion Coating.
• Lens: Clear Tempered Glass Lens
• Yoke Mount